Skip to content
BW Studios — Big Wig Studios
Blackout FilmPlanning guide7 min read

Planning a blackout studio shoot: what to check before booking

Turn your treatment into a useful studio brief, with checks for lighting changes, movement, reflections, recorded sound and the time needed from load-in to pack-down.

Actual studio floor with camera positions and a controlled filming setup
Original Big Wig Studios facility photograph. Configuration is agreed around the shoot.

Your treatment describes the finished film. Your studio brief needs to explain how you'll make it: the space each shot needs, the lighting changes, the action and any sound you must record. Give the studio enough detail to assess those needs before you book, rather than starting and ending with a request for availability.

At a glance

What should you check before booking?

Send your treatment and shot list, showing the widest frame, full movement and each lighting look. State whether you'll film to playback or record speech or live music. All studios at Big Wig Studios are soundproofed, and a sound test can be arranged. Plan equipment, crew, safe setup and the time needed from load-in to pack-down.

Turn the treatment into a studio brief

Describe what the audience should see. Is the subject isolated against black, performing within a visible set, or moving through several lighting looks? Add reference frames and explain what matters in each one: the composition, colour, movement or atmosphere. That helps the camera and lighting teams work towards the same result.

Include the delivery formats and framing. A close-up, full-length performance and wide group shot need different amounts of working space. If you need landscape and vertical versions, put both in the shot plan so the camera team can account for them from the start.

Use the Blackout Film Studio page as the starting point for your enquiry. Send dates, crew and performer numbers, your shot plan and props, along with any support you need. The useful question is whether the setup suits your shoot, not just whether it's available.

  • Creative: treatment, reference frames, essential shots and intended background appearance.
  • Working space: widest frame, performer positions, camera travel, props and room around the set.
  • Production: dates, delivery formats, sound requirements, equipment, crew and proposed schedule.

Count lighting changes, not just shots

Mark each distinct look on the shot list. Moving from a static portrait to a performance with movement may mean changing the lighting, repositioning equipment and rehearsing the action. Several shots might share one setup; one ambitious shot might take longer to prepare than to film.

Ask the camera and lighting leads to estimate the work for each change. List the lights and accessories they need, including anything brought in by the crew. Share the power needs, equipment positions and overhead mounting or other rigging plan with the studio so the setup can be planned safely.

Where the creative plan allows, group shots that share the same lighting and set arrangement. Leave time for an initial camera test and a review after major changes. The first take should build on a lighting decision, not be the first opportunity to discuss it.

Check reflections and movement in the actual shot

Bring shiny wardrobe, glasses, jewellery and reflective products into the test. Check them under the planned lighting, from the camera positions you'll use. Include turns and rotations: a still reference won't tell you whether reflections become distracting during the action.

Walk through the full movement, not only the starting mark. Check the widest camera position and the furthest performer position. Allow space outside the frame for microphone booms, stands and lighting accessories, and include any floor markings or treatments in the setup plan.

Plan safe routes around the set as well as the area on camera. Include reduced-light movement and cable routes in the production's risk assessment, and arrange working lights for setup and between takes. Keep escape routes clear and marked; don't obscure exit signs or disable required emergency lighting to get a darker frame. Official fire-safety guidance sets out the need for clear escape routes and emergency lighting where needed.

Treat sound as a separate booking decision

Filming a performance to a finished track is different from recording an interview, spoken introduction or live vocal. Say which you need. For playback, identify who supplies and operates it, and how the track version and takes will be labelled for the edit.

All studios at Big Wig Studios are soundproofed, and the Blackout Film Studio can be booked for spoken dialogue or live music recording. Microphone placement, room reflections, equipment sounds and performer movement still affect the result. Shure's recording guidance explains why room acoustics and microphone position matter alongside control of unwanted noise.

A sound test can be arranged before the shoot if needed. Discuss a representative test with the intended microphones and relevant equipment running, then listen back with the person responsible for sound. Don't build the plan around a promise that unwanted noise can be removed in the edit.

Schedule the whole booking, from load-in to strike

Schedule all the work that needs the room, not just the filming. That includes load-in, setup, pre-light — preparing the lighting before filming — tests, rehearsal, changes and review. Leave time for strike: dismantling the setup and packing down. Check how those stages fit within the studio's hire period.

Get estimates from the crew rather than giving every setup the same allowance. Include wardrobe and prop changes, breaks, resets and some contingency. If you need to prepare the lighting before the main shoot day, ask whether separate access is available and how it would be booked.

Set a filming cut-off that leaves enough time for safe pack-down and any agreed restoration. Get the loading arrangements and overrun terms in writing, then put the agreed access window on the call sheet.

Name the people responsible for each part of the plan

Make a short responsibility list showing who supplies equipment, who operates it and who can approve changes. Room hire, equipment supply, studio supervision and a production crew are different services. If you need help beyond the hire, discuss production support and record what's included.

Cover lighting and safe installation, camera setup, sound or playback, props, wardrobe, scheduling and approvals. One person may handle several jobs on a small shoot; the point is to make sure each job has an owner.

Assigning tasks doesn't transfer legal duties. HSE's film and broadcasting guidance says responsibilities must be defined, risks managed and risk assessments and controls reviewed as work progresses. It also states that legal duties cannot be delegated. Share planned effects, set alterations or attachments with the studio and revisit the assessment when the action or equipment changes.

Name the people who will check the recorded files, make backups and hand the media to post-production. Set the recording and handover requirements with those teams before the shoot; editing and finished deliverables need their own agreed provision.

Send a booking-ready enquiry

Your enquiry doesn't need a long document. Attach the essential shots, lighting looks, sound plan and schedule, and flag anything that needs a technical discussion or test. Include a contact who can answer production questions and approve changes.

For a London shoot, enquire about the Blackout Film Studio with that brief, or call Big Wig Studios on 020 3878 7697. Settle the booking terms and what's included before issuing the final call sheet.

Put it into practice

Before you confirm: blackout shoot checklist

Tick off each point as you prepare your brief.

Sources & further reading

Blackout Film Studio

Enquire with your shoot brief

Plan a London shoot in a soundproofed studio, including spoken dialogue or live music where required. Share your treatment, shot plan and schedule, and discuss a sound test if needed.